Skip to main content

Service

Forensic Investigations

Structural assessment and water-intrusion investigation for cracking, concrete spalling, corrosion, leaks and settlement.

Verification
Florida PE-led engineering, delivered to the Fortis Standard
Updated
September 4, 2026
Section detail of a concrete slab edge with a mapped crack tagged as an exhibit, above the four-step Fortis forensic method: observe, investigate, determine, opine.

01 / The Documented Cause

What Does A Board Need Before It Repairs?

The Direct Answer

What Does A Forensic Investigation Determine?

A forensic investigation provides a structural assessment and evaluation of cracking, concrete spalling, leaks, settlement or movement before repairs are bid. The assessing engineer documents the observed conditions and develops conclusions within the agreed investigation scope.

The point is a documented cause, not a guess: repairs bid against an unexplained symptom tend to be repeated.

Scope

What Does A Forensic Investigation Answer?

Investigation Scope

  • /01
    Cracking And Settlement

    Structural movement, subsidence, and foundation compromise are evaluated to determine whether observed distress is active, progressive, or stable.

  • /02
    Leaks And Moisture Intrusion

    A water-intrusion investigation traces visible leak paths and moisture migration to their source so repair recommendations address the documented cause rather than only the symptom.

  • /03
    Concrete Spalling And Corrosion

    Concrete spalling, delamination and reinforcing-steel corrosion are assessed to document their visible extent and support appropriate engineering recommendations.

The Fortis Deliverable

Photographed, Located And Dated Findings

Every observation is recorded in the field with photographs tied to a specific building location and dated for the record.

Sealed Engineering Report

The final deliverable is a written root-cause assessment signed and sealed by a licensed Florida professional engineer.

Engineer Of Record Signatory

Findings are presented to the board by a Fortis PE, so directors can act on a documented cause rather than a contractor’s estimate.

When the findings support repair documentation or engineering oversight, the next scope may be concrete restoration engineering. Fortis engineers and may oversee that work; the repair contractor performs the physical construction.

Who Seals The Report

Your final root-cause investigation report will be signed and sealed by a Fortis PE working to the Fortis Standard.

Each Fortis inspection report includes 20+ photographs, each located and dated in the field.

Coverage

Forensic investigations are not driven by a county deadline, so there is no Broward-versus-Miami-Dade distinction to reconcile. Fortis performs forensic investigations across Broward, Miami-Dade and Palm Beach.

Broward County
Miami-Dade County
Palm Beach County

The Forensic File

From The Forensic File

Questions

Common Forensic Investigation Questions, Answered

What does a forensic investigation determine?

A forensic investigation provides a structural assessment and evaluation of cracking, concrete spalling, leaks, settlement or movement. The assessing engineer documents the observed conditions and develops conclusions within the agreed investigation scope before repair recommendations are prepared or repairs are bid.

What can a water-intrusion investigation evaluate?

A water-intrusion investigation evaluates visible leak paths, moisture migration and the building conditions around them. The assessing engineer documents the observed evidence so engineering recommendations can address the supported cause rather than only the visible symptom.

When should a board investigate before bidding repairs?

When the cause of the distress is not established. Boards and owners bring Fortis in when cracking, spalling, leaks or movement need a documented cause before repairs are bid. Bidding first means contractors price a symptom, and the board has no independent basis to judge whether the proposed scope addresses what is actually wrong.

Is a forensic investigation driven by a county deadline?

No. Forensic investigations are not driven by a county deadline, so there is no Broward-versus-Miami-Dade distinction to reconcile and no filing date to work back from. An investigation is commissioned because a condition needs explaining — usually before repair money is committed, an insurance position is taken, or a dispute hardens.

How is a structural and forensic finding documented so it holds up later?

Each finding is photographed, located and dated in the field, then carried into a sealed report the board can act on. Distress is located on the building elevation and photographed with a scale reference, so the record supports the conclusion rather than merely accompanying it. The findings are documented to stand up to insurers and counsel.

Who performs the investigation and presents it to the board?

The investigation is performed under the responsible charge of a Fortis PE working to the Fortis Standard. The work follows the same documented method whoever is assigned, and the final engineering report is sealed when required by the agreed scope.

Where does Fortis perform forensic investigations?

Fortis performs forensic investigations across Broward, Miami-Dade and Palm Beach. Because the work is not tied to a county filing programme, the same method applies in each of the three counties — the investigation is scoped to the condition being explained rather than to whichever jurisdiction the building happens to sit in.

Scope reference

How Distress Is Mapped On A Facade

Cracking, spalling, rust staining and settlement are located on the building elevation, photographed with a scale reference and dated in the field, so the record supports the conclusion.

Next Step

Establish Where Your Building Stands

Send the property details and Fortis will confirm which requirement applies and provide a written scope before any fieldwork begins.